Many of the Swiss watch companies had a clock or two in their product line, and some of them are now thought of as collector’s items, particularly those made by Omega, the Atmos clocks by Jaeger le Coultre, and Accutron tuning fork clocks made by
Here are a couple of Cyma alarm clocks I have, housing the cal. R10 movement which is a 10 jewel movement of 22 lignes (49.6mm or 23 size) diameter. Of course, coming from a watch manufacturer, they beat at a respectable watch-type rate of 18,000 bph. I still use this as my bedside clock. Another point of interest to me is that the dial is marked with the name of a local jewelry store (Caris Bros.), which closed down in the 70’s, after having been in business since the turn of the century.
The movement is well finished for a clock movement – almost as nice as some watch movements – with straight grained plates, snailed winding gears, and the plate edges cleanly finished. I believe these clocks date back to the 50’s, and the movements are listed in parts catalogs from the 40’s.
I obtained this second clock (below) from a watchmaker’s estate sale about 15 years ago. It still has the shop repair tag on it, quoting a price of 1/6 (one shilling and sixpence) for the replacement of its broken mainspring. Australia changed from Pounds/Shillings/Pence to Dollars and Cents in 1966 – and the decimal equivalent of 1/6 was 15 cents. Not an expensive repair, but apparently was too much for the owner, who never returned to collect the clock. To this day, more than 35 years later, it still awaits that new mainspring… one day I will get around to it!
The movement shown below is an AS690 (A. Schild) 19 ligne (42mm or 16 size) movement with a thickness of 8.75mm. It has 13 jewels and like the Cyma, beats at 18,000 bph. It is very well finished, even more so than the Cyma, with all steel parts highly polished, and plates polished and anglaged. The finish is as good as a fine watch movement. The strange-looking curved armed resting on the top balance cap jewel looks similar to the Cymalflex shock absorber, but in fact it is merely a spring holding down the cap jewel, curved to allow clearance around the regulator. I obtained this as a NOS movement from my materials supplier, so I have no idea what the clocks looked like that housed these movements. It has the import code AXZ on the balance bridge, which is the code for
This is a Bulova Accutron clock. Bulova used a standard Accutron 214 movement fitted into a specially built case, rather than design a special clock movement as most other watch manufacturers did.
Pics copyright © 2001 by Paul Delury
May 24th 2001, Perth, Western Australia.